Equipment financing
Financing is subject to application and credit approval.
Apply with TimePayment (opens in a new tab)Plan this layout in 3D with Mortuary360 before you request a quote.
2 Body Bariatric Roll-In Mortuary Cooler – Model 2BXR
American Mortuary CoolersSale
Model: 2BXR · 2026 Model
ELECTRICAL115 Volts standard · 208 Volts with compressor upgrade
Regular price
$8,117.01
List price
Sale price
$8,117.01
Unit price
per
Estimated from
2 Body Bariatric Roll-In Mortuary Cooler – Model 2BXR
$8117.01
Apply with TimePayment (opens in a new tab)
Apply for financing
Equipment estimate only. Subject to lender approval and terms. Tax and delivery extra.
Zelle®
ACH
Pairs with this cooler
The Low Profile Mortuary Lift lowers to 13″ and loads every tier of this cooler, for safer, faster body transfers.
Low Profile Mortuary LiftBattery powered · lowers to 13″ · Price shown in cart
Shipping calculated at checkout.
- 2-body cadaver capacity (bariatric clearance)
- Cot-direct roll-in design with 4 inch urethane core
- Self-contained refrigeration, 208-230V single-phase
- 304 stainless steel interior
Featured equipment
View all Body Trays & Boards-
HD Mortuary Plastic Storage Board
-
Extra Large Plastic Cadaver Rack Storage Board 29 Inch
-
High-Impact Plastic Body Boards, Set of 6
-
TITAN Pro Standard Black Slider Transfer Board – 72.25 × 18.25 in
-
Plastic Mortuary Rack Storage Board (Set of five)
-
48-Pack Mortuary Rack Boards
-
74-Pack Mortuary Rack Storage Boards
-
TITAN Pro Standard White Slider Transfer Board – 72.25 × 18.25 in
-
TITAN Pro Oversized Black Slider Transfer Board – 72.75 × 22.25 in
-
Low Profile Cadaver Tray, 2-Pack
Purchase terms & policies Shipping, returns, warranty and financing disclosures
Key details
- Refrigeration: Heatcraft Climate Control PRO³ top-mount packaged system (PT0032MANAPNA), fully assembled, charged, run-tested and wired at the factory
- Capacity: 2,900 BTU/h at 95°F ambient, 35°F box
- Electrical: 115V / 1-phase / 60 Hz, 4.6 running amps, NEMA 5-20R cord and plug, no hard-wiring
- Refrigerant: A2L, meets current DOE/EPA efficiency rules
- Refrigeration warranty: Heatcraft manufacturer warranty, 2 years from installation or 30 months from shipment
Product information
Product details & specifications
Product details
The 2 body bariatric roll-in mortuary cooler lets a cot roll straight in at cot height through a 36-inch clear door, with self-contained NSF/UL certified refrigeration from American Mortuary Coolers, starting at $8,117.01.
The AMC Model 2BXR is a USA-made, 2-body bariatric roll-in mortuary cooler with a 36-inch clear opening and self-contained 115V refrigeration, starting at $8,117.01.
The wider entrance is intended for facilities handling oversized cases, but cot width still needs to be checked against the opening. An upper storage shelf is included, and this model ships as an unassembled panel kit; compare roll-in mortuary coolers by capacity and access before choosing.
U.S.-brand refrigeration, U.S. warranty
When you compare body coolers, check who makes the refrigeration and who stands behind it. Some imported coolers ship with off-brand compressors that are hard to get parts or warranty service for. This cooler runs on a Heatcraft Climate Control PRO³ packaged refrigeration system from Heatcraft Refrigeration Products, a U.S. commercial refrigeration manufacturer headquartered in Stone Mountain, Georgia, with a U.S. manufacturer warranty.
- Refrigeration: Heatcraft Climate Control PRO³ top-mount packaged system (PT0032MANAPNA), fully assembled, charged, run-tested and wired at the factory
- Capacity: 2,900 BTU/h at 95°F ambient, 35°F box
- Electrical: 115V / 1-phase / 60 Hz, 4.6 running amps, NEMA 5-20R cord and plug, no hard-wiring
- Refrigerant: A2L, meets current DOE/EPA efficiency rules
- Refrigeration warranty: Heatcraft manufacturer warranty, 2 years from installation or 30 months from shipment
At a glance
- 2-body capacity: extra-wide cot-direct roll-in for bariatric cots · 36″ clear door
- Right-hand or left-hand door handing: specify by prep-room workflow
- Modular insulated cabinet, 4″ urethane core
- Self-contained refrigeration: 115V single-phase, NEMA 5-20R plug
Form AMC-OM-2BR Rev. A · Last updated January 15, 2026 · PDF
AMC 2BR & 2BXR 2-Body Roll-In Mortuary Cooler User Manual
Dimensions, assembly, refrigeration start-up, cot loading, cleaning, maintenance and warranty for the 2BR and 2BXR.
Download the User Manual (PDF) All equipment manualsPhysical Dimensions
| Exterior (cabinet) | 89"D × 44"W × 61"H |
|---|---|
| Exterior (with 15.25" cooling unit) | 89"D × 44"W × 76.25"H |
| Upper storage shelf | Included, mounted 14.5" below the interior ceiling |
| Door opening | 36"W clear, side to side |
| Loading method | Roll-in at cot height, cot or dressing table rolls straight in, no lifting |
| Shipping weight | 1,400 lbs (freight) |
Standard design features
- Self-contained condensing unit. The compressor, condenser and evaporator come as one factory-packaged unit mounted on the cabinet, so no refrigeration lines are run on site.
- Digital thermometer and temperature controller. A digital display shows the box temperature at a glance, and the controller holds the setpoint you choose for body holding.
Door hardware and refrigeration
- Chrome-plated lockable door handle. A standard handle is included. Add the chrome-plated lockable handle to keep the cooler closed to everyone except authorized staff.
- Magnetic gasketed door seal. The insulated door closes against a magnetic gasket that seals the whole door edge, which keeps cold air in and holds 34–40°F after the door is opened. Clean and inspect the gasket weekly with mild soap and water.
- Energy-compliant refrigeration. The self-contained drop-in refrigeration system uses A2L refrigerant and meets current DOE/EPA efficiency rules. Standard units are sized for a conditioned room, and upgrade levels are available for warmer rooms.
Specifications
| Body capacity | 2 cadavers, extra-wide cot-direct roll-in |
|---|---|
| Door handing | Right-hand or left-hand |
| Cabinet construction | Modular insulated, 4″ urethane core |
| Refrigeration | Self-contained |
| Operating range | 34–40°F body holding, see temperature guide |
| Voltage | 115V / 1-phase / 60 Hz · 4.6 A · NEMA 5-20R plug |
Electrical & Compressor Specifications
Amperage: 4.6 A, 115V · 1-phase · 60 Hz · Plug type: NEMA 5-20R, cord & plug supplied
| Supply voltage | 115V / 1-phase / 60 Hz |
|---|---|
| Unit amps (running) | 4.6 A |
| Minimum circuit ampacity (MCA) | 15.0 A |
| Max overcurrent protection (MOPD) | 15 A fuse / breaker |
| Cord & plug | Supplied from factory, NEMA 5-20R |
| Compressor system capacity | 2,900 BTU/h @ 95°F ambient · 35°F box |
| Refrigerant | A2L |
| Defrost | Air defrost |
| Evaporator fan motor | 2-speed EC · 250 CFM |
| Efficiency (AWEF) | 5.61, meets DOE minimum |
| Refrigeration unit size | 15.25″ H, 28.5″ × 24.5″ footprint · 115 lb package |
| Refrigeration platform | Heatcraft Climate Control PRO³, factory electrical spec sheet (PT0032MANAPNA) |
Plug-and-play on a dedicated 115V / 20-amp circuit, no hard-wiring required. A stamped electrical schedule ships with every quote.
Ambient Room Temperature & Refrigeration Sizing, Read Before You Order
The temperature of the room around your cooler matters as much as the cooler itself. Every refrigeration system rejects heat into that room. The hotter the room, the longer the compressor runs, and the harder it is to hold a steady 34–40°F . Standard refrigeration is sized for a conditioned, ventilated indoor room . If your space runs warm, upsize the refrigeration when you order.
Why ambient temperature is critical
- Holding temperature: an undersized system in a hot room cannot recover after each door opening, so box temperature drifts above 40°F.
- Compressor life: long, continuous run times in high heat wear out the compressor and fans early.
- Condensation & humidity: warm, humid rooms produce more condensate. Connect the drain line, and route it to the external drain or a condensate pump.
How to choose
- Account for heat from nearby equipment, sun-facing walls, bay doors and how often the cooler is opened.
- Keep the required clearances: 1″–1.5″ around the cabinet and 16″ above and around the compressor. A blocked compressor behaves like a hot room.
- Install indoors only. Unconditioned garages, mechanical rooms and rooms next to crematory retorts need a review before ordering, call 1-888-792-9315.
If the room runs warmer than 75°F, choose a Refrigeration Upsize option above.
Sizing, door handing & cot compatibility
The 2-Body Bariatric Roll-In has the same 89″ depth and 61″ cabinet height as the standard 2BR, widened to 44″ with a 36″ clear door so a bariatric cot or dressing table rolls straight in. For standard-width cots, see the 2-Body Standard Roll-In (2BR).
Door handing: match right-hand or left-hand swing to prep-room flow so the cot operator has unobstructed roll-in from the staging side.
Frequently asked questions
What temperature does this mortuary cooler hold, and when is a freezer needed?
It holds a steady 34–40°F for short-term body holding. Facilities that hold remains longer, or hold unidentified cases, add a mortuary freezer. Compare both in mortuary cooler vs. morgue freezer.
How many bodies does it hold, and how does it load?
It holds 2 standard-sized bodies. Loading method: roll-in at cot height. The cabinet is 89"D × 44"W × 61"H (76.25"H with the refrigeration unit), with a door opening of 36"W clear, side to side.
What room conditions does it need?
Standard refrigeration is sized for a climate-controlled, ventilated indoor room at 65–75°F with normal door use. If the room runs warmer or sees heavy door traffic, choose a Refrigeration Upsize option.
Does it need a floor drain?
Warm, humid rooms produce more condensate. Connect the drain line, and route it to an external drain or a condensate pump.
Upright, roll-in or walk-in: which fits my facility?
Upright and roll-in coolers suit lower census and tight prep rooms. A walk-in with racks scales for higher census and surge capacity. Compare them in upright vs. walk-in mortuary coolers, or browse upright mortuary coolers.
Can I get a custom size or a walk-in instead?
Yes. Send your room dimensions and body capacity through the custom walk-in quote request, and we will return a written quote.
How is shipping charged?
The cooler ships by freight, and shipping is calculated at checkout for your delivery address. Purchase orders are accepted.
Return Policy: All coolers, racks, lifts, and other products are non-returnable, no exceptions. All refrigeration products purchased on or after 1/1/2026 are 100% non-returnable under any circumstances. Please review our full Return Policy before purchasing.
FREE DOWNLOADS
Maintaining your Model 2BXR: free maintenance guide and service log
Every 2-Body Bariatric Roll-In Mortuary Cooler ships with a printable two-page AMC Model 2BXR 2-Body Bariatric Roll-In Mortuary Cooler maintenance guide and service log (PDF). Page one is a daily, weekly, monthly, quarterly and annual upright mortuary cooler maintenance checklist written for the top-mounted self-contained refrigeration unit, the door gasket and the roller tiers, with the warranty conditions that apply to this model and a compliance summary of its lower-GWP refrigerant and current DOE and EPA rules. Page two is a quarterly maintenance log, a service and repair record and a notes section to keep with the unit.
- Dated, signed quarterly maintenance logs are a condition of every warranty claim, so keep the completed record page with the cooler.
- Use it alongside the mortuary cooler preventive maintenance checklist and the seasonal bulletins in the Mortuary Cooler Maintenance Center.
- Parts, manuals and the Remove From Service steps are on the tech support and service hub; call 1-888-792-9315 with your model and serial number.
Ordering 2 Body Bariatric Roll-In Mortuary Cooler – Model 2BXR
Review the listed specifications, selected options and included items before ordering. Use the configuration selector for the current price and availability; do not assume that accessories pictured with a product are included unless the listing says so.
Source funeral supplies and mortuary equipment from one supplier, with nationwide shipping. For an equipment package or a multi-location order, request an itemized quote with the selected products, quantities and delivery ZIP codes. Confirm freight and delivery requirements for the equipment you choose.
Flexible payment options, with clear terms
Review the payment methods offered at checkout for your order. If a payment plan is available, its options and eligibility are shown by the provider. The equipment price and any financing cost are separate; compare the full payment terms before choosing a plan.
Enter payment details only in checkout or the payment provider's application. Use general customer support for product and order questions, not for sending full card numbers or sensitive financing information.
Specifications & product identity
Review Product details for the published product information, and confirm the specifications of your selected configuration before ordering.
| Door Orientation options | Right Hand, Left Hand, Doesn't Matter |
|---|
| Brand / vendor | American Mortuary Coolers |
|---|---|
| Equipment type | Roll-In Mortuary Cooler |
| Model | 2BXR |
Dimensions & fit
Published dimensions remain in Product details when a separate dimensions section is not available.
FAQs & buying help
How can I ask a question about this product?
Contact our team with the product name and the specification or option you want to confirm.
What should I include when requesting a quote?
Include the product, quantity, required configuration and delivery location in your quote request.
Where can I review shipping and purchase policies?
Open Shipping & support for the published freight, returns and custom-order policy links.
Resources & documents
Product-specific documents and planning links remain in Product details when a separate resources section is not available.
Plan delivery. Review the details.
Review the published policies and confirm product-specific requirements before placing your order.
Financing & purchase orders
Choose how to pay
Purchase through the product options above, or use one of these support paths for a financed or institutionally quoted order.
Formal quotes & purchase orders
Request documented pricing, freight planning, and configuration support before issuing a purchase order.
Request a formal quoteEstimates are for qualified buyers with approved credit (WAC) and reflect the equipment price only. Shipping, freight, and applicable taxes are not included and will increase your total and payments. Final amounts are set at checkout or on your quote.
Government and institutional buyers: request a PO quote.
Plan your next step with Mortuary360
Explore supported cooler models and handling equipment in the Mortuary360 builder. Save a planning reference, then confirm the selected equipment and room requirements with AMC.
A builder view is a planning aid, not an engineered installation or confirmation that every catalog model is supported.