All About 10x10 Mortuary Coolers: Find the Right Solution for You
Understanding Mortuary Refrigeration Solutions
10x10mortuarycooler.com is a specialized website offering walk-in mortuary refrigeration units designed for funeral homes, mortuaries, and crematoriums seeking reliable body preservation solutions. If you're looking for information about this domain or its products, here's what you need to know:
| Key Information About 10x10mortuarycooler.com |
|---|
| Product: 10x10 walk-in mortuary cooler |
| Capacity: Holds up to 12 bodies with 4-tier racks (sold separately) |
| Dimensions: Exterior 10'×10'×7'4" / Interior 9'5"×9'5"×7'½" |
| Temperature Range: 36°F to 39°F |
| Warranty: 1-year parts & labor, 5-year door & floor, 15-year panel, 50-year thermal |
| Manufacturing: 100% Made in USA |
| Contact: For quotes call 1-888-792-9315 |
The proper preservation of deceased loved ones is a core responsibility for funeral service professionals. A high-quality mortuary cooler provides the controlled environment necessary to slow decomposition, maintain dignity, and allow families adequate time for funeral arrangements and visitation.
What sets the 10x10 mortuary cooler apart is its balance of capacity and footprint. At 100 square feet, it efficiently accommodates multiple bodies while fitting into most existing facilities without excessive renovation. The 3.5" thick insulated panels ensure optimal temperature control and energy efficiency, crucial factors for facilities operating 24/7.
I'm Mortuary Cooler, a national-level mortuary cooler supplier with extensive experience helping funeral directors select appropriate refrigeration solutions like those offered through 10x10mortuarycooler.com. My expertise focuses on matching funeral homes with the right cooling systems to ensure respectful preservation while optimizing operational efficiency.
What Is 10x10mortuarycooler.com?
10x10mortuarycooler.com is exactly what it sounds like – a specialized website dedicated to connecting funeral professionals with our most popular size of mortuary cooler. Think of it as your direct line to the source, where you can learn about, quote, and purchase high-quality 10×10 walk-in mortuary refrigeration units without any middlemen or markup.
We created this focused domain to make your life easier. Instead of wading through general refrigeration websites or trying to adapt commercial coolers to mortuary needs, you can access purpose-built solutions specifically designed for the dignified care of those entrusted to your funeral home.
When you reach out through 10x10mortuarycooler.com, you're connecting directly with the folks who design and build your cooler – real people who understand the unique challenges funeral professionals face every day.
Origins of the Domain & Brand Presence
10x10mortuarycooler.com represents a new approach in how we serve funeral professionals. According to ABTdomain statistics, our domain was among the 127,262 newly registered .com domains on May 14, 2025, appearing within the first 2,960 listings. This reflects our commitment to creating an easily findable online presence with a name that tells you exactly what we offer.
While the domain may be relatively new, it's backed by our established reputation at American Mortuary Coolers. We've chosen this ultra-specific naming strategy to help busy funeral directors find exactly what they need without wasting precious time.
You can download the complete list of .com newly registered domains to see where we fit in the broader digital landscape. Our presence spans multiple regions across the country, with locations from Tennessee to California, ensuring we can provide timely service regardless of where your funeral home operates.
Core Products & Services Listed on 10x10mortuarycooler.com
While our flagship product is the 10×10 walk-in mortuary cooler, we understand that every funeral home has unique needs. That's why we offer a range of solutions beyond our namesake unit.
Walk-in coolers remain our most popular offering, with the 10×10 size striking that perfect balance between capacity and space efficiency for most funeral homes. For those with different spatial requirements, we provide various dimensions to fit your available space.
Upright mortuary units are ideal for facilities where floor space comes at a premium. These vertical storage solutions maximize your capacity while minimizing footprint – perfect for urban funeral homes or those looking to expand capacity without renovation.
Roll-in models deserve special attention for busy funeral homes. These units are designed with wider doors and clearance to accommodate standard mortuary cots, eliminating the need to transfer the deceased between arrival and preparation. This not only saves staff time but reduces the risk of injury during transfers.
We also offer a complete range of accessories including multi-tier racks, body lifts, storage boards, and preparation tables – all designed to work seamlessly with our cooling systems.
Many funeral directors appreciate our white-glove delivery option, where we handle everything from delivery to assembly and basic training. This turnkey approach lets you focus on caring for families rather than coordinating complex installations.
For more detailed information about our company and products, you can visit More info about 10x10mortuarycooler.
10x10mortuarycooler.com: Key Features, Specs & Capacity
When it comes to finding the perfect balance between space and capacity, our 10x10 mortuary cooler hits the sweet spot for many funeral homes. This isn't just a refrigeration unit – it's the cornerstone of respectful care that many facilities depend on daily.
Let me walk you through what makes this model special. With exterior dimensions of 10' × 10' × 7'4" and interior measurements of 9'5" × 9'5" × 7'½", you're getting 100 square feet of thoughtfully designed space. The walls and ceiling are a substantial 3.5 inches thick, providing excellent insulation. When equipped with our 4-tier rack system (available separately), this unit comfortably accommodates up to 12 bodies – perfect for small to medium funeral homes, even during those inevitable busy periods.
The temperature control system maintains a consistent 36°F to 39°F throughout the interior – the ideal range for preserving remains without tissue damage from freezing. Our digital thermostat makes temperature adjustments straightforward, and the remote refrigeration system ensures quieter operation so you can maintain a peaceful atmosphere for families and staff.
Detailed Specifications & Materials
We believe what's inside your cooler matters just as much as how it performs. That's why our 10x10 mortuary cooler is built with materials that stand the test of time.
The 3.5" thick panels feature high-density insulation with no wood core – an important detail that prevents moisture absorption and rot over time. This high R-value insulation exceeds the requirements of the Federal Energy Independence & Security Act of 2007, so you're getting energy efficiency built right in.
For the interior, you can choose between stainless steel or galvanized panels with bacteria-resistant film – both excellent for maintaining a sanitary environment. The exterior features a durable powder-coated finish that's easy to clean and maintains its appearance for years. We've included UL-NSF approved vapor-proof LED lighting with an external switch, and all hinges and latches are chrome-plated to resist corrosion in the cooler's humid environment.
The refrigeration system uses environmentally compliant R-404A refrigerant and operates on single-phase power (either 115V or 208–230V, depending on your facility's setup). We've positioned the condensing unit remotely to reduce noise in work areas, and the forced-air circulation via durable coaxial blower ensures even cooling throughout the space.
For flooring, our standard model includes an insulated floor, but we also offer floorless designs for installation over existing concrete floors. Aluminum kick plates add durability where it's needed most, and an optional ramp makes transferring remains easier on your staff.
Our warranty coverage speaks volumes about our confidence in these units:
| Component | 10x10mortuarycooler.com Warranty | Industry Average |
|---|---|---|
| Parts & Labor | 1 year | 90 days - 1 year |
| Door & Floor | 5 years | 1-3 years |
| Panels | 15 years | 5-10 years |
| Thermal (panels) | 50 years | 10-25 years |
Temperature Control & Energy Savings
In the funeral business, precise temperature control isn't just about energy bills – it's about providing dignified care. Our 10x10 mortuary cooler uses a microprocessor-based PID digital controller to maintain temperatures between 36°F and 39°F with minimal fluctuation.
We've included an audio-visual alarm system that alerts you to any temperature variations, giving you peace of mind especially during off-hours. For those who prefer remote monitoring, our optional WiFi connectivity lets you check conditions from anywhere.
Energy efficiency is built into every aspect of our design. The high-density PUF insulation creates an effective thermal barrier between the inner and outer chambers. Magnetic door gaskets form airtight seals that prevent cold air from escaping, while self-closing door mechanisms minimize the time doors remain open. Even our lighting choices – LED fixtures rather than traditional fluorescents – contribute to lower energy consumption.
For facilities looking to maximize savings, we often mention the CoolBot retrofit option. As one of our California customers shared, "I've become the largest refrigeration facility for human remains in Southern California because of CoolBot. It is literally a game changer in the funeral industry." This alternative approach pairs a CoolBot controller with a standard window air conditioner to maintain temperatures between 37-38°F, often at lower operating costs.
Racking & Handling Options
The way you configure your 10x10 mortuary cooler directly impacts both capacity and workflow efficiency. While our 10x10 unit can accommodate up to 12 bodies, this depends on selecting the right racking system for your needs.
Most funeral homes choose our 4-tier roller racks to maximize capacity, but we also offer 3-tier systems for easier access and 2-tier configurations that accommodate bariatric cases. If your facility has unique requirements, talk to us about custom racking solutions – we've helped funeral homes with special circumstances create systems that work perfectly for their situation.
Body handling equipment is just as important as the cooler itself. Our manual body lifts, electronic lifting systems, transfer boards, and mortuary cot adapters all work seamlessly with the 10x10 mortuary cooler to create a safer environment for your staff.
Don't forget about storage boards – these essential accessories come in several varieties. Our HD Mortuary Plastic Storage Boards start at $184.75, while Mortuary Stainless Storage Trays (approximately $499.00) offer superior durability. For budget-conscious facilities, our Mortuary Laminated Storage Boards provide an economical option without compromising quality.
When planning your cooler purchase, I always recommend thinking about these handling accessories as part of your initial investment. They not only increase your functional capacity but also improve workflow and reduce the risk of staff injuries during transfers – something that becomes increasingly important as our industry faces staffing challenges.
Comparing Mortuary Cooler Types & How the 10x10 Stacks Up
When it comes to mortuary refrigeration, one size definitely doesn't fit all. Funeral homes have distinct needs based on their case volume, available space, and workflow preferences. Let's explore how our 10x10 model compares to other options on the market.
Main Types of Mortuary Coolers:
- Walk-In Coolers (like the 10x10 model)
- Upright Mortuary Coolers
- Roll-In Coolers
- Custom-Built Solutions
Our 10x10 walk-in cooler strikes that sweet spot between footprint and capacity that many funeral directors are looking for. It's neither too large for smaller facilities nor too limited for growing businesses.
Walk-In vs Upright Coolers (including 10x10mortuarycooler.com)
Walk-In Coolers like our 10x10 model shine when it comes to capacity and workflow. With proper racking, you can accommodate up to 12 decedents in a single unit – perfect for those busier seasons that every funeral home experiences.
The spacious interior gives your staff room to move and work with dignity. Many of our customers appreciate the ability to organize and access different cases without the shuffling that smaller units require. Industry data shows walk-ins typically store a minimum of nine bodies, making them the workhorse of medium to large operations.
On the flip side, Upright Coolers have their own strengths. They're the space-savers of the mortuary world, typically holding 1-6 decedents in a much smaller footprint. If you're working with limited square footage or need supplemental capacity, uprights can be an excellent choice. They're generally easier to install – often just requiring you to plug them in and go.
The 10x10mortuarycooler.com solution definitely requires more planning than an upright unit, but that investment pays off in operational efficiency. When it comes to maintenance, our walk-ins typically need less frequent service, though the service calls may require specialized technicians. Uprights have more accessible components but might need attention more often.
Roll-In & Mobile Solutions
Roll-In Coolers serve a unique purpose in our industry. Rather than transferring the deceased from a cot to a rack, these units let you roll the entire mortuary cot directly inside. They typically accommodate 2-3 bodies and are especially valuable for rural funeral homes covering large service areas.
We've seen funeral directors use roll-ins brilliantly for disaster response situations or when they need temporary capacity. The convenience factor is significant – less lifting means reduced staff strain and injury risk.
While our 10x10mortuarycooler.com walk-in offers greater overall capacity, many forward-thinking funeral homes maintain both types. They'll use roll-ins for intake and transfer while relying on the 10x10 walk-in for longer-term storage. This combination creates an efficient workflow that respects both the staff and the deceased.
For those unique situations requiring mobility, portable mortuary solutions can be deployed to disaster sites or used during facility renovations. These aren't permanent installations but can be lifesavers when circumstances demand flexibility.
Custom & Modular Builds
Every funeral home is unique, which is why we take such pride in our custom capabilities. The modular panel system used in our coolers, including the 10x10 model from 10x10mortuarycooler.com, allows for considerable personalization to fit your specific needs.
Need a non-standard dimension to fit an awkward space? No problem. Want multiple door placements for better workflow? We can do that. Looking for specialized racking configurations for bariatric cases? We've got you covered.
One benefit our customers particularly appreciate is the ability to disassemble, relocate, and reassemble their unit as needs change. As one funeral director told us, "Being able to take my cooler with me when we moved locations saved us thousands and prevented any disruption in service."
While the 10x10 model represents our most popular standard size, at American Mortuary Coolers we create custom solutions ranging from compact 2-body units to large facilities handling dozens of decedents. As a satisfied customer recently shared, "AWIC will answer every question regarding refrigeration types and applications to recommend the best fit for your exact requirements."
The best part? Our custom solutions address regional building requirements too – with options for seismic, wind, hurricane, and snow-load compliance depending on your location.
Installation, Customization & Regulatory Compliance
Setting up your 10x10 mortuary cooler doesn't have to be complicated, but it does require careful planning to ensure everything runs smoothly. Whether you're handling the installation yourself or opting for our white-glove service, proper site preparation makes all the difference in how your cooler performs.
Before your cooler arrives, you'll need a level concrete floor, good ventilation for the condensing unit, and the right electrical service (either 115V or 208-230V single-phase power). Remember to plan for adequate clearance around the unit - not just for the door to swing open, but for your staff to move comfortably around the space. Ideally, your cooler should be positioned close to preparation areas to create an efficient workflow.
Step-By-Step Installation Checklist
If you're managing your own installation, we've put together a straightforward checklist to guide you through the process. Start with proper floor preparation - ensuring the surface is completely level, clean, and sealed if needed. For some installations, you might need to install a vapor barrier as well.
Next comes panel assembly, which is actually quite intuitive thanks to our numbered panel sequence. You'll secure the cam-locks, apply the recommended sealant at all joints, and carefully attach the door with proper alignment. This is where precision pays off - a properly aligned door makes a world of difference in energy efficiency.
Setting up the refrigeration system requires a bit more expertise. You'll need to mount the condensing unit in a well-ventilated area, connect the refrigerant lines (this step requires a certified technician), complete the electrical connections (with a qualified electrician), and charge the system with R-404A refrigerant.
Before you start using your cooler, conduct a thorough inspection. Check all seals and gaskets, test the door operation, verify the temperature controls are working properly, and confirm there's proper drainage. Once everything looks good, allow about 24 hours for the temperature to stabilize before putting the unit into service.
Most installations take just 1-2 days, depending on your site conditions and whether electrical and refrigeration work happens simultaneously.
Customization Options & Accessories
Your 10x10mortuarycooler.com unit can be customized to perfectly match your facility's needs. Many funeral homes choose structural modifications like additional doors, custom height adjustments, or side-opening configurations. Some even add floor drains, sloped floors, or dedicated freezer compartments for long-term storage.
To improve safety and convenience, consider operational accessories like temperature alarm systems (around $775), locking handles for improved security ($220), heavy-duty casters if you need mobility ($885), or external ramps for easier access ($575). Our WiFi temperature monitoring system with mobile alerts gives you peace of mind even when you're away from the facility.
We've also designed workflow improvements based on feedback from funeral professionals. Options like integrated preparation tables, lifting equipment, basket stretchers, adjustable lighting systems, and bariatric handling solutions can make daily operations smoother and safer for your team.
Don't let budget concerns hold you back from getting exactly what you need. American Mortuary Coolers offers financing with 0% down and no payments for 90 days on qualifying orders. This makes it easier to include those helpful customizations right from the start, rather than wishing you had them later.
Ensuring OSHA & Health Department Compliance
Navigating regulatory requirements is part of running any funeral business, and your mortuary cooler plays a key role in compliance. Our 10x10 mortuary cooler maintains temperatures between 36°F and 39°F, precisely within the range required for proper body preservation. The non-porous, easily cleanable surfaces prevent contamination, while proper drainage and ventilation keep mold and odors at bay.
From an OSHA standpoint, we've incorporated ergonomic design elements to reduce lifting injuries, non-slip flooring options for safety, emergency interior release mechanisms (because no one should ever be accidentally locked inside), and proper lighting for safe operation.
Documentation is just as important as the equipment itself. You'll need to maintain temperature logs (either digital or manual), keep maintenance records, document cleaning schedules, and track staff training. These records aren't just for inspectors - they help you monitor your system's performance and identify potential issues before they become problems.
Beyond regulatory compliance, we believe in compassionate care protocols that honor the dignity of those in your care. This includes reliable body identification systems, respectful handling procedures, and when appropriate, creating comfortable family viewing accommodations. After all, the technical aspects of refrigeration serve a deeply human purpose - allowing families the time they need to say goodbye properly.
Pricing, Warranty & After-Sales Support
Investing in a quality mortuary cooler is an important decision for any funeral service provider. When you're considering a 10x10 mortuary cooler, understanding the complete financial picture helps you make the best choice for your business.
The base price of these coolers includes everything you need to get started: insulated wall and ceiling panels, a complete door assembly with hardware, optional flooring, the refrigeration system, basic lighting, and temperature controls. Think of it as the foundation of your preservation system.
One thing to note – the racks are typically sold separately. This actually works in your favor, as it allows you to customize the interior configuration based on your specific needs rather than paying for a one-size-fits-all solution. For comparison, smaller options like mini mortuary cooler body boxes start at $6,095 for a 2-body unit without flooring, while larger configurations can run up to $10,454.
Shipping is available throughout the lower 48 states, with costs varying based on your location. For the most accurate pricing information custom to your situation, I'd recommend giving us a call directly at 1-888-792-9315. Our team can provide a detailed quote based on your specific requirements.
What truly sets 10x10mortuarycooler.com apart is our comprehensive warranty coverage:
We stand behind our products with a 1-year parts and labor warranty, a 5-year door and floor warranty, an impressive 15-year panel warranty, and an industry-leading 50-year thermal warranty on panels. This tiered approach reflects the different lifespans of various components while demonstrating our confidence in the long-term durability of our core insulated panels.
Financing & Quote Process
We understand that budgeting for major equipment can be challenging, which is why we've created flexible financing options to make your purchase more manageable:
0% down payment means you can acquire the equipment you need without a large initial outlay. Plus, with no payments for 90 days on qualifying orders, you'll have time to install your cooler and integrate it into your operations before the first payment comes due.
Our credit application process features quick approval times, and we offer leasing options for facilities that prefer to manage their budget through predictable monthly payments rather than a larger one-time purchase.
If you're a tax-exempt organization or reseller, simply submit your resale certificate to avoid sales tax charges where applicable.
Getting a quote is straightforward and personal. Just call us at 1-888-792-9315, and we'll discuss your specific requirements, walk through available options, and provide a detailed written quote. If financing interests you, we'll guide you through the credit application. Once all details are confirmed, we'll schedule delivery and installation based on your preference for self-installation or our white-glove service.
For more complex installations or custom dimensions, we may recommend completing our Walk-in Quotation Request form to ensure we capture all your specifications correctly.
Real-World Testimonials & Case Studies
Nothing speaks to the value of our mortuary coolers better than the experiences of funeral professionals who use them every day:
A funeral director from Southern California shared: "I've become the largest refrigeration facility for human remains in Southern California because of CoolBot. It is literally a game changer in the funeral industry. An 8'x12' cooler built for about $5,000 provides capacity for up to 25 people."
While this testimonial references an alternative cooling technology, it highlights the tremendous impact that reliable, affordable refrigeration can have on a funeral business's growth potential. Our 10x10 mortuary coolers offer similar benefits but with professional-grade construction and dedicated support.
From a rural hospital installation, we heard: "The CoolBot and the 12,000 BTU AC have been working great, keeping the cooler at 37 to 38 degrees F."
Temperature stability isn't just a technical specification—it's essential for proper preservation and showing respect for the deceased in your care. The 10x10 mortuary cooler's dedicated refrigeration system delivers consistent performance even in challenging environments.
When we survey our customers, several benefits consistently stand out: reliability in maintaining proper temperatures, durability of construction, energy efficiency compared to older systems, the quality of our customer support, and the flexibility of the modular design.
These real-world experiences underscore why choosing a quality mortuary cooler from a reputable manufacturer with proven industry experience makes all the difference—not just for your business operations, but for the families you serve during their most difficult moments.
Frequently Asked Questions about 10x10mortuarycooler.com
How many bodies can a 10x10 mortuary cooler safely hold?
One of the most common questions we hear from funeral directors is about capacity. A 10x10mortuarycooler.com unit can comfortably accommodate up to 12 bodies when properly equipped with our 4-tier rack systems (which are sold separately from the base unit).
That actual capacity varies depending on your specific needs. If you serve a community with larger individuals or frequently handle bariatric cases, you might plan for 8-10 bodies instead of the maximum 12. The generous interior dimensions (9'5" × 9'5" × 7'½") provide plenty of space not just for the deceased, but also for proper air circulation – something that's absolutely essential for maintaining consistent temperatures throughout the unit.
Many of our customers find that the 12-body capacity hits a sweet spot for small to medium funeral homes, offering enough space for busier periods without requiring excessive floor space in your facility.
What power requirements are needed for installation?
Setting up your 10x10mortuarycooler.com unit requires standard single-phase electrical power – either 115V or 208-230V at 60Hz. The specific amperage needs typically fall between 15-30 amps, depending on which refrigeration system you select for your cooler.
For the smoothest installation experience, we strongly recommend having a dedicated circuit installed by a qualified electrician. This isn't just about meeting code requirements – it helps prevent power-related issues that could affect the performance of your cooler.
If your facility is in an area with unstable power (which is more common than you might think in rural locations), we offer optional automatic voltage stabilizers. These provide valuable protection for your refrigeration system against damaging power fluctuations. It's a small investment that can significantly extend the life of your equipment and provide peace of mind, especially during storm season when power quality can be unpredictable.
Can I customize racking, doors, or add a freezer option?
Absolutely! The 10x10mortuarycooler.com units are designed with flexibility in mind. We understand that every funeral home has unique needs and workflows.
For racking, you can choose between 2-tier, 3-tier, or 4-tier configurations based on your capacity requirements. These are available in either stainless steel (which many facilities prefer for its durability and ease of sanitation) or heavy-duty aluminum for a more budget-conscious option.
Door customizations are popular among our customers who want to optimize their workflow. Options include oversized doors for easier access with gurneys, side-opening configurations for tight spaces, or even additional doors if your cooler needs to be accessible from multiple rooms or hallways.
For facilities that occasionally need freezer capabilities – perhaps for longer-term storage or forensic applications – we can incorporate freezer options into your design. This typically involves creating a separate compartment with dedicated cooling to maintain temperatures well below freezing. Many clients opt for a design where the freezer shares a common wall with the cooler, maximizing energy efficiency while minimizing the overall footprint.
I recently worked with a medical examiner's office that needed both cooler and freezer capabilities but had very limited space. We designed a custom solution with a 70/30 split within the 10×10 footprint – giving them the flexibility they needed without requiring additional floor space. The possibilities for customization are nearly endless!
Conclusion
When it comes to caring for those who have passed, having the right refrigeration solution isn't just about equipment—it's about providing dignity during life's most difficult moments. The 10x10mortuarycooler.com solution strikes that perfect balance that so many funeral homes are searching for: ample capacity in a manageable footprint.
I've spoken with countless funeral directors who tell me the same thing—they need reliability above all else. With room for up to 12 bodies in a thoughtfully designed space, this cooler meets the needs of most small to medium funeral homes while leaving room for those inevitable busy periods we all face in this industry.
What truly sets these units apart is their longevity. The warranty package speaks volumes about the manufacturer's confidence—1 year on parts and labor, 5 years on doors and floors, 15 years on panels, and an impressive 50 years on thermal performance. When you're making an investment of this significance, that kind of protection matters.
The modular design is another feature my clients particularly appreciate. As your business evolves, so can your cooler configuration. The American-made construction ensures you're getting quality that meets all domestic regulations while supporting U.S. manufacturing.
At American Mortuary Coolers, we understand that behind every technical specification is a family in mourning. Our refrigeration solutions are designed with both the practical needs of funeral professionals and the emotional needs of families in mind. The 10x10mortuarycooler.com unit embodies this philosophy perfectly.
Whether you're expanding your current facility, replacing outdated equipment, or setting up a new location, I encourage you to consider what this cooler offers. The combination of capacity, quality construction, and long-term reliability makes it a sound investment for funeral homes committed to providing exceptional care.
For more detailed information about mortuary coolers and how they can serve your specific needs, please visit our information page about mortuary coolers. Ready to take the next step? Visit 10x10mortuarycooler.com to request a personalized quote.
When you invest in quality refrigeration, you're not just purchasing equipment—you're ensuring your ability to provide families with the time they need to say goodbye properly. That's a commitment worth making, and we're here to help you honor it with solutions that are reliable, efficient, and above all, respectful.